Last Updated: Dec 13, 2005 K-Series Compression Calculator v.01 BETA This calculator is intended for use as a general estimate of your compression only. Not all values are verified, if you have verified values, please email them to me @ compcalc@zealautowerks.com NOTE: K-Series info is still very limited, most values have not been verified and act as more of a placeholder until correct values can be found, so please use this calculator accordingly. Want to see more F1 and WRC on TV??? Sign the petition! Sign Here! B-SERIES CALCULATOR | D-SERIES CALCULATOR | H/F-SERIES CALCULATOR Block Crank   K20 K24 Other K20 K24 Other Bore (mm) Stroke (mm) Deck Height (mm) Head K20a1 K20a2 K20a3 K24a1 K24a2 K24a3 K24a4 Other Combustion Chamber Volume (cc) Piston K20a1 (SiR) K20a2 (RSX-S) K20a3 (RSX) K24a1 (CRV) K24a2 (TSX) K24a3 (Element) K24a4 (Accord) Other Dome (cc) Comp Height (mm) Connecting Rod K20 K24 Other Rod Length (mm) Headgasket Thickness K20 K24 Other Thickness (in) Bore diff (mm) * Head Milling and Block Decking Enter total amount head has been milled and block decked. (in) Piston-to-Deck Height This value is dynamically created on the figures given above negative value = out of the hole (in) Maxium Operating RPM Enter the maxium operating RPM to determine mean piston speed and maxium piston acceleration (rpm) COMP RATIO : 1 Displacement cc Calculate Rod / Stroke Ratio Mean Piston Speed fps Maxium Piston Acceleration fps2 * for slightly better results, enter the difference between the bore diameter of the headgasket and the cylinder bore. copyright © 2005 zealautowerks.com. all rights reserved.